- Light Absorption Rate: 35%
- Light Reflection Rate: 15%
- Infrared Reflection Rate: 74%
- Infrared Absorption Rate: 20%
- Optical Clarity: 93%
- Surface Infrared Blocking Rate: 94%
- UV Rejection Rate: 99%
- Signal Interference: Yes
- Warranty: 5 Year
- Light Absorption Rate: 35%
- Light Reflection Rate: 15%
- Infrared Reflection Rate: 74%
- Infrared Absorption Rate: 20%
- Optical Clarity: 93%
- Surface Infrared Blocking Rate: 94%
- UV Rejection Rate: 99%
- Signal Interference: Yes
- Warranty: 5 Year

Photosync Metal Multilayer Sputter Window Tint

  • Superior Heat Absorption Performance: Photosync Metal utilizes advanced heat reflection technology from Photosync Films and PPF JSC. With a Total Solar Energy Rejected (TSER) rating of up to 63%, Photosync Metal significantly reduces heat transmission through windows, even after more than 3 hours of sun exposure without air conditioning.
  • Optimal UV Protection: The Metal series blocks 99% of UV rays, ensuring the longevity of your interior and protecting your health.
  • Effective Infrared Radiation Rejection: Photosync Metal eliminates 94% of infrared radiation in the 750-2200nm wavelength range, which is exceptionally high for metal-based products in the industry.
  • Clear Visibility: Photosync Metal provides clear visibility in all weather conditions with a transparency rate of 92%. However, it is not recommended to use overly dark shades, as the metal material reflects a lot of light at night, making it difficult to see.
  • Long-Lasting Performance: Metal is warranted for 5 years against manufacturing defects and performance degradation. After 5 years, performance may decline depending on weather, climate, and user habits.

Production Technology

The METAL line of Photosync window films is produced using multilayer metal sputtering technology, a widely adopted manufacturing process. METAL PHOTOSYNC incorporates Nitride and Tungsten with Gradient to create coatings with special optical and thermal properties, optimizing energy reflection across the entire wavelength range.

Photosync Metal Multilayer Sputter Window Tint

  • Superior Heat Absorption Performance: Photosync Metal utilizes advanced heat reflection technology from Photosync Films and PPF JSC. With a Total Solar Energy Rejected (TSER) rating of up to 63%, Photosync Metal significantly reduces heat transmission through windows, even after more than 3 hours of sun exposure without air conditioning.
  • Optimal UV Protection: The Metal series blocks 99% of UV rays, ensuring the longevity of your interior and protecting your health.
  • Effective Infrared Radiation Rejection: Photosync Metal eliminates 94% of infrared radiation in the 750-2200nm wavelength range, which is exceptionally high for metal-based products in the industry.
  • Clear Visibility: Photosync Metal provides clear visibility in all weather conditions with a transparency rate of 92%. However, it is not recommended to use overly dark shades, as the metal material reflects a lot of light at night, making it difficult to see.
  • Long-Lasting Performance: Metal is warranted for 5 years against manufacturing defects and performance degradation. After 5 years, performance may decline depending on weather, climate, and user habits.

Production Technology

The METAL line of Photosync window films is produced using multilayer metal sputtering technology, a widely adopted manufacturing process. METAL PHOTOSYNC incorporates Nitride and Tungsten with Gradient to create coatings with special optical and thermal properties, optimizing energy reflection across the entire wavelength range.

TSER
VLT
VLR
TSET
Reduce Glare
Optical Clarity
54%
49%
17%
46%
24%
93%
TSER
VLT
VLR
TSET
Reduce Glare
Optical Clarity
54%
49%
17%
46%
24%
93%
TSER
VLT
VLR
TSET
Reduce Glare
Optical Clarity
60%
35%
15%
40%
37%
93%
TSER
VLT
VLR
TSET
Reduce Glare
Optical Clarity
60%
35%
15%
40%
37%
93%
TSER
VLT
VLR
TSET
Reduce Glare
Optical Clarity
63%
20%
14%
37%
46%
93%
TSER
VLT
VLR
TSET
Reduce Glare
Optical Clarity
63%
20%
14%
37%
46%
93%

PRODUCT CODES

  • Symbol:

TSER: Total Solar Energy Reject

VLT: Visible Light Transmission

VLR: Visible Light Reflectance

TSET: Total Solar Energy Transmission

  • Notes:

The performance results apply to ¼” (6 mm) clear glass that has been laminated with Photosync film allowing 50% visible light transmission.

The performance results were obtained using the Window software from Lawrence Berkeley National Laboratory (LBNL) and the NFRC 200 solar spectrum from 780 nm to 2500 nm. The higher the number, the more infrared energy is reflected and absorbed and released outside. Infrared Reject Energy Reflective is a calculation method approved by IWFA.

PRODUCT CODES

  • Symbol:

TSER: Total Solar Energy Reject

VLT: Visible Light Transmission

VLR: Visible Light Reflectance

TSET: Total Solar Energy Transmission

  • Notes:

The performance results apply to ¼” (6 mm) clear glass that has been laminated with Photosync film allowing 50% visible light transmission.

The performance results were obtained using the Window software from Lawrence Berkeley National Laboratory (LBNL) and the NFRC 200 solar spectrum from 780 nm to 2500 nm. The higher the number, the more infrared energy is reflected and absorbed and released outside. Infrared Reject Energy Reflective is a calculation method approved by IWFA.

Reasons to Choose Metal

  • Photosync Metal: meets most requirements for premium window tint, offering excellent heat rejection, UV blocking, and a 5-year warranty without performance degradation.
  • Ideal for windows exposed: to sunlight without air conditioning, and does not interfere with signals.
  • Provides comparable: performance to expensive metal sputtering technologies at a reasonable cost.

When Not to Choose Metal

  • Customers seeking a product with durability and a warranty exceeding 10 years should not choose Photosync Metal.
  • Not suitable for those willing to invest heavily in window tint for top-tier performance.
  • For high transparency and glare reduction, Photosync’s Ceralux and IRD are recommended over Metal.

COMMITMENT STATEMENT

At Photosync Films and PPF JSC, we select brand representatives based on strict criteria to ensure top-notch service for every customer. Our partners' credibility, customer service quality, and installation skills are rigorously verified.

Expert Installation:

Technical proficiency contributes 70% to customer satisfaction. Our global representatives are experienced with high-end window tints, catering to both common and luxury vehicles. We guarantee meticulous installation and the best warranty policy for our customers.

Customer Support:

We provide quality products and comprehensive support from installation to warranty. Proud of our brand representatives, we commit to raising service standards for maximum customer satisfaction.

Reasons to Choose Metal

  • Photosync Metal: meets most requirements for premium window tint, offering excellent heat rejection, UV blocking, and a 5-year warranty without performance degradation.
  • Ideal for windows exposed: to sunlight without air conditioning, and does not interfere with signals.
  • Provides comparable: performance to expensive metal sputtering technologies at a reasonable cost.

When Not to Choose Metal

  • Customers seeking a product with durability and a warranty exceeding 10 years should not choose Photosync Metal.
  • Not suitable for those willing to invest heavily in window tint for top-tier performance.
  • For high transparency and glare reduction, Photosync’s Ceralux and IRD are recommended over Metal.

COMMITMENT STATEMENT

At Photosync Films and PPF JSC, we select brand representatives based on strict criteria to ensure top-notch service for every customer. Our partners' credibility, customer service quality, and installation skills are rigorously verified.

Expert Installation:

Technical proficiency contributes 70% to customer satisfaction. Our global representatives are experienced with high-end window tints, catering to both common and luxury vehicles. We guarantee meticulous installation and the best warranty policy for our customers.

Customer Support:

We provide quality products and comprehensive support from installation to warranty. Proud of our brand representatives, we commit to raising service standards for maximum customer satisfaction.

Privacy |  Terms of Use |  Cookie Policy |  Press |  Contact

Photosync Films and PPF JSC: A member of IRD Group

Address: 3340 Green Rd, Houston, TX 77032, USA

Tel: +1 (281) 227-8835

Email: sale@photosyncfilms.com

©2024 Photosync Film & PPF